Email:
Password
 
 
 
Axis P7214 video servers/encoder 720 x 576 pixels 30 fps
P7214 H.264, M-JPEG, 30/25 (NTSC/PAL) fps, PTZ Video Encoder
1 rating
Product category
Vendor
Part number
On the market since
Warranty from Axis
Video Servers/Encoders 
0417-002
30. august 2011
3 years
5 stars, based on 1 ratings
 
Hvem bruger produktet
0



Please login to view pricing
-
Stock available when logged in


Details about the product
Specifications
Video
Maximum video resolution 720 x 576 pixels
Maximum frame rate 30 fps
Motion JPEG frame rate 30 fps
MPEG-4 frame rate 30 fps
NTSC resolutions 720 x 480 pixels
PAL resolutions 720 x 576 pixels
Technical details
PTZ control (Pan/Tilt/Zoom) Yes
Angle of rotation 270°
Wall mountable Yes
Internal memory 512 MB
Flash memory 128 MB
Image settings Brightness, Color, Compression, Contrast, Mirroring, Privacy mask, Rotation
Security
Security algorithms 802.1x RADIUS
Video motion detection Yes
IP address filtering Yes
Password protection type Yes
Audio detection Yes
Active tampering alarm Yes
Networking
Wi-Fi No
Supported network protocols IPv4/v6, HTTP, HTTPS*, IEEE 802.1X*, QoS 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
Quality of Service (QoS) support Yes
Power over Ethernet (PoE) Yes
Copper ethernet cabling technology 100BASE-TX,10BASE-T
Ports & interfaces
BNC input ports 4
I/O terminal ports 1
Line-in Yes
Ethernet LAN (RJ-45) ports 1
Line-out Yes
DC-in jack Yes
RS-485 ports 1
RS-422 ports 1
Microphone in Yes
Power
Power consumption (typical) 8 W
Power requirements 8-20 V DC
Operational conditions
Operating temperature (T-T) 0 - 50 °C
Operating relative humidity (H-H) 20 - 80%
Weight & dimensions
Dimensions (WxDxH) 109 x 160 x 37 mm
Weight 570 g
Certificates
Certification EN 55022 B, EN 61000-3-2, EN 61000-3-3, EN 55024, EN61000-6-1, EN61000-6-2, EN 60950-1, C-tick AS/NZS CISPR 22, FCC 15 B B, ICES-003 Class B, VCCI B, KCC B, UL/IEC/EN 60950-1
Processor
Built-in processor ARTPEC-4
General product description from the vendor
PLEASE NOTE: Below description comes directly from the vendor and may describe information relating to the entire product-series. We also recommend that you verify that the product you are looking at has the specifications that you require before ordering. You are always welcome to chat with us we are happy to help with any information you may require.
- Full frame rate in all resolutions
- Simultaneous H.264 and Motion JPEG
- Edge storage
- High resolution quad-view
- Two-way audio
- PTZ support
- Power over Ethernet

High performance, 4-channel solution with excellent audio quality
AXIS P7214 Video Encoder is a compact and cost-effective four-channel video encoder with great video performance and excellent audio quality. It can simplify migration to network video without upgrading existing camera systems.

Powerful and full-featured
AXIS P7214 provides edge storage through a microSDHC memory card slot. It supports all types of analog cameras including PTZ (pan/tilt/zoom) and PTZ domes. The encoder features both RS-422 and RS-485 for controlling analog PTZ cameras. Configurable inputs/outputs can be connected to external relays and sensors for activating lights, locking/unlocking doors etc.

The easy way to a smarter CCTV system
AXIS P7214 is perfect for small and medium analog video installations, especially where an IP network infrastructure is already in place. It is designed for installation close to the cameras. The encoder is powered over Ethernet using the same cable as for data transmission, which simplifies installation. A power supply is also included in the package.

Reduced bandwidth and storage
AXIS P7214 can deliver two simultaneous video streams, one in H.264 and another in Motion JPEG, at full frame rate in resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). The H.264 video compression format drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is supported for increased flexibility.


Mutonic
Ørestads Boulevard 106
2300 København S
Danmark

CVR nr.: DK35845267
Contact Mutonic
Email: team@mutonic.com
Phone: +45 70 272 440

Good to know
Terms and conditions
Privacy / DPA
Notification settings

All prices are in DKK, ex. tax and are only available with a valid TAX number.

Click to change country / region.
Language:   

Payment options
- Credit (approval required)
- Credit card
Dankort VISA Mastercard JCB